HC Aluminum is large scale 1050 aluminium sheet manufacturer based in China who offer prime quality aluminum sheet 1050. 1050 aluminium sheet is a kind of pure aluminum sheet, and the aluminum content must reach 99.5% or more to be a qualified product. The aluminum alloy technical standard (GB/T3880-2012) stipulates that the aluminum content of 1050 reaches 99.5%. The 1050 aluminum sheet manufacturer of HC Aluminum strictly controls the product quality to ensure that the composition is correct, the quality is guaranteed, and the aluminum sheet specifications are complete.
The 1050 aluminium sheet belongs to pure aluminum, and industrial pure aluminum cannot be strengthened by heat treatment and can be strengthened by cold deformation. The only form of heat treatment is annealing. The starting temperature of recrystallization is related to the impurity content and the degree of deformation, generally around 200°C. The annealed sheet has σb=80～100MPa, σ0.2=30～50MPa, ζ=35%～40%, HB=25～30. After 60%～80% cold deformation, although the chaos can be increased to 150～180MPa, the ζ value drops to 1%～1.5%. Increasing the content of iron and silicon impurities can increase strength, but reduce plasticity, conductivity and corrosion resistance. By adjusting the annealing temperature after cold deformation or controlling the amount of cold deformation after annealing, the mechanical properties of different cold hardening states can be obtained.
1050 aluminum processed by 1050 aluminium sheet manufacturer is often used to press semi-spherical pattern aluminum plate, embossed aluminum coil, embossed aluminum plate, stamping parts, deep drawing, lighting lamp shade, reflective components, decoration customization, chemical containers, radiators, signs, electronics, lamps, nameplates, electrical appliances, stamping parts and other products. In some occasions that require high corrosion resistance and formability, but low strength requirements, especially in the manufacture of chemical equipment.