Aluminium alloy 5052 is an aluminum alloy belonging to the Al-Mg series of alloys, which has a wide range of applications and is especially indispensable in the construction industry. It is one of the most promising alloys. It has good corrosion resistance, excellent welding performance, good cold working performance and medium strength. The main alloying element of 5052 aluminium alloy is magnesium, which has good formability, corrosion resistance, weldability and medium strength. It is used in the manufacture of aircraft fuel tanks, oil pipes, thin plate parts for vehicles and ships, instruments, street lamp brackets and rivets, hardware products, electrical appliances, etc.
5052 aluminium alloy is AL-Mg series alloy aluminum alloy plate. Magnesium is the main alloying element in 5052 alloy aluminum plate. It is the most commonly used rust-proof aluminum. This alloy has high strength, especially fatigue strength; excellent plasticity and corrosion resistance; cannot be strengthened by heat treatment; good plasticity during semi-cold work hardening; low plasticity during cold work hardening; good corrosion resistance and good Excellent welding performance; poor processing performance; can be polished.
Aluminum-magnesium alloys also contain a small amount of manganese, chromium, beryllium, titanium and other elements. Most of the manganese in the alloy forms a solid solution of MnAl6. The role of chromium in 5052 aluminum plate is similar to that of manganese. It improves the resistance to stress corrosion cracking, increases the strength of the substrate and weld, and reduces the tendency of welding cracks, but its content generally does not exceed 0.35%.
Chemical Composition of Aluminium alloy 5052
Aluminum Al: balance
Silicon Si: ≤0.25
Copper Cu: ≤0.10
Magnesium Mg: 2.2~2.8
Zinc Zn: ≤0.10
Manganese Mn: ≤0.10
Chromium Cr: 0.15～0.35
Iron Fe: ≤0.40
Note: Individual: ≤0.05; Total: ≤0.15
Mechanical Properties of Aluminium alloy 5052:
Tensile strength σb (MPa): 173～244
Conditional yield strength σ0.2 (MPa): ≥70
Density: 2.68 g/cm3
Sample Size: All Wall Thicknesses
Note: The longitudinal mechanical properties of the pipe are at room temperature