Aluminium sheet grade 1100 is an industrial pure aluminum with an aluminum content (mass fraction) of 99.00%. It cannot be heat treated for strengthening. It has high corrosion resistance, electrical conductivity, and thermal conductivity, as well as low density and good plasticity. Various aluminum materials can be produced through pressure processing, but it has low strength. HC Aluminum producing 1100 aluminum sheet is a listed company focusing on the research and production of hot-rolled 1100 aluminum sheet. Aluminum sheet grade 1100 is an industrial pure aluminum with advantages such as high elongation, high tensile strength, good conductivity, and high formability. It has good formability, high corrosion resistance, and does not require high-strength components.
Aluminium sheet grade 1100 H18 belongs to fully hard aluminum sheet series, which has not been annealed and is a product with high hardness and poor ductility. It is not suitable for bending, and will crack when bent at a 90-degree angle. HC Aluminum provides 1100 H18 aluminum sheet and 1100 H18 aluminum coil products, which can be customized in various non-standard sizes, large plate surfaces, small specifications, etc. It provides 1100 aluminum sheet and 1100 fully hard aluminum sheet.
Aluminium sheet grade 1100 is suitable for products with high hardness requirements that are not bent or stretched. H18 aluminum sheet for stamping products has no burrs, but it should be noted that it cannot be bent or stretched. 1100 H18 aluminum sheet can provide national standard materials, and thickness and width can be customized.