The treatment equipment of aluminium strip exporter is generally composed of a continuous train including uncoiling, strip pretreatment, coating, curing, cooling and coiling equipment. The finished aluminum strip are obtained by rolling the aluminum ingot, according to the needs of the application, is cut into the aluminum strip with the required width through the slitting machine. Aluminium strip is mainly used to process parts that require good forming properties, high corrosion resistance or good weldability. It is an important raw material in industry. When the aluminium strip is coated, the coating is dried and cured by hot air circulation, and the strip is cooled by air quenching or water cooling.
Aluminium strip exporter - HC Aluminum use aluminum as the main raw material and mixed with other alloying elements. Aluminum has good formability, fatigue strength and medium static strength. The oxidation coloring production line for aluminum strips in the workshop is usually configured as a single-span or multi-span. The main span is arranged with processing tanks and the feeding, unloading and inspection sites; the auxiliary span is arranged with facilities such as power supply, refrigeration, pure water, recycling, and environmental protection. The anodizing equipment uses aluminum as the anode, and uses the high-frequency oxidation power supply as the direct current in the electrolyte to form a dense and porous artificial oxide film on the surface of the aluminium strip. By selecting different electrolyte composition treatment times, different thicknesses and Performance of oxide film.
When choosing the oxidation power supply, aluminium strip exporter recommended to use the high-frequency oxidation power supply water-cooled type, because the output waveform is a square wave, and the energy-saving effect is obvious and the film coating speed is fast, it is recommended to use.