Gallery
Overview
| Alloy | 1060, 1145,1200, 8011 |
| Temper | O |
| Thickness | 0.15-0.2mm |
| Width | 15-500mm |
| Application | Cable Wrapping |
| Alloy | 1060, 1145,1200, 8011 |
| Temper | O |
| Thickness | 0.15-0.2mm |
| Width | 15-500mm |
| Application | Cable Wrapping |
Aluminum strip for cable belongs to commercially pure wrought 1000 series alloy family with a purity of 99.5% Al. So, 1050 aluminum strip properties show excellent ductility, plasticity, corrosion resistance, and high electrical and thermal conductivity. In addition, 1050 aluminum alloy strip is also a non-heat treatment alloy with low strength, which cannot be strengthened by heat treatment and has weak machinability, but can accept contact welding and gas welding. Currently, since the production process of 1000 Series alloy strip such as 1050 aluminum strip is relatively simple and the technology is quite mature, the highly economical 1050 aluminum strip is very suitable for large-scale application in the field of industrial manufacturing.
Cable Wrapping Material-Aluminum Foil Strip | |||||
Alloy | Temper | Thickness(mm) | Width(mm) | Length (mm) | Application |
1145, 8011, 1200 | O | 0.15~0.20 | 15mm~500 | 2050 | telecommunication cable |
Film: | EMAA/EAA 0.05mm tolerance +/-0.005mm Both sides laminated and one side laminated | ||||
Remark: | special specifications can be produced accordingly to your requirement. | ||||
Heat resistance (N/cm) | ≥17.5 |
Peeling strength (N/cm) | ≥6.13 |
Water resistance (68+/-1C, 168H) | ≥6.13 |
Tensile Strength (Mpa) | ≥54 |
Elongation rate % | ≥15 |
Anticorrosion | (0.1mol/L, NaoH, 480h) ≥7 |
Dielectric strength 1kVd.c.1.min ELE (single side laminated tape) | No discharged |
Dielectric strength 1kVd.c.1.min ELE (single side laminated tape) | No discharged |